Ligasep – Membrane Degasification
Membrane degasification applications are primarily located downstream of MF/UF filtration equipment. Membrane degasification enables the reduction in dissolved gas in treated water which facilitates increased efficiency of downstream technologies such as RO, IEX, and ED.
Cinco MUD No. 1 Brackish Groundwater Desalination Plant
Presentation will show the challenges associated with impaired water that includes arsenic, iron, gas, boron, heat, and the membranes selected for the RO system and the pretreatment system consisting of MicroFiltration. The major plant components includes chemical addition prior to PALL MicroFiltration system as a pretreatment to the conventional brackish reverse osmosis plant . The […]
Case Studies on MBR Technologies Currently Being Implemented in Texas
Because of the historical cost and perceived complexity of MBR technology, there are still a limited number of large MBR facilities in operation in Texas (the majority of the existing facilities are package plants, less than 0.1 MGD). The goal of this presentation is to review case studies for different MBR facilities in Texas (some […]
Designing MBR Systems with Flexibility in Mind
This presentation provides an overview of membrane bioreactor (MBR) processes and identifies options for incorporating flexibility in design. Several case studies are presented that show examples of flexible MBR designs while highlighting the suitabiblity of MBR as a technology for retrofitting existing wastewater treatment facilities.
Texas Case Study, Single Stage MBR Package Plant System with Ceramic Membranes
Single-stage MBR technology is designed and engineered to be extremely simple to operate and optimize. This single-stage process uses one set of blowers to provide mixing, air scouring and process oxygen. Biologically treated wastewater is filtered using Silicon Carbide (SiC) membranes to produce reuse quality effluent with no recycle, no mechanical mixing and no fine […]
Developing and Implementing a Membrane Cleaning Procedure
Membrane cleaning basics as it applies to micro, ultra Nano and reverse osmosis Membranes. when to clean how to determine that cleaning point, what cleaners to use and why. determining the effectivenesss of cleaning.
RO Membrane Autopsy
All the different analysis methods and tools that are used to perform a membarne autopsy will be discussed. In addition, the reasons why to have an autopsy perfomed, membrane selection for the autopsy, and interpretation of the results will be covered.
Membrane Cleaning Safety
Presentation will cover safety while conducting chemical clean in place procedures. Presentation will begin with safe chemical handling procedures and continue with potential chemical piping system hazards. Presentation will end with a list of unsafe practices to avoid.
Established Practices, Innovative Design, and New Products: A New Generation of Ultra High Pressure Desalination
Recovery and efficiency are synonymous in an era of water scarcity. A new generation of Ultra High Pressure (UHP) systems rated for 1740PSI (120bar) address the challenges of concentration and osmotic pressure to open a new frontier of brine salinities above 80kppm, representing a convergence of established practices and innovative design with today’s turbochargers, pressure […]
Closed Circuit Reverse Osmosis – A Dynamic, Decoupled & Data-Driven RO Solution
CCRO has emerged as the industry leader in high recovery, high reliabilty and flexible RO operation. The technology has been implemented in over a dozen industries and applications across the globe with system sizes ranging from 10 gpm to over 10 MGD. In this presentation, we’ll review the performance of three (3) of the 250+ […]
